O-rings

O-rings in stock in sizes from an inside diameter below 1 mm up to hundreds of millimetres – more than 9,400 items. They are made to DIN 3770, DIN 3771 and ISO 3601; we stock metric and inch cross-sections 1.78, 2.62, 3.53, 5.33 and 6.99 mm.

Materials: NBR 70 and 90 ShA for oils and fuels, FPM (Viton) 70 and 80 ShA for higher temperatures, EPDM 70 for water and steam including FDA grades, silicone MVQ, HNBR, polyurethane PU, CR, PTFE and FFKM. An O-ring is designated by inside diameter x cross-section, material and hardness – e.g. 25 x 2.5 NBR 70. Items in stock are shipped immediately, delivery within 1–2 days.

Frequently asked questions

How do I measure an O-ring correctly?

For an O-ring the inside diameter and the cross-section (thickness) matter, the outside diameter is not stated. Look for the size in the form inside diameter x cross-section, for example 25 x 2.5 NBR 70. An old ring may be deformed after use, so it helps to also measure the groove or the shaft the ring sits on. Typical cross-sections of AS568 inch sizes are 1.78, 2.62, 3.53, 5.33 and 6.99 mm.

Which O-ring material should I choose?

NBR is the standard for oils and fuels, roughly from −30 to +100 °C. Choose FPM (Viton) for higher temperatures up to roughly +200 °C and for many chemicals. EPDM suits water and steam, roughly up to +130 °C (peroxide-cured up to +150 °C), but it is not resistant to mineral oils or ordinary grease. Silicone MVQ withstands roughly −50 to +175 °C. For aggressive media we also stock HNBR and FFKM.

What does hardness 70 or 90 Shore A mean?

The number after the material is the hardness in Shore A. Hardness 70 is the standard for general use, harder 90 Shore A O-rings are chosen for higher pressures and smaller gaps where a softer ring could be extruded. We mainly stock NBR 70 and NBR 90 and FPM 70 and 80. When replacing a ring, it is safest to keep the hardness of the original one.

Do you have O-rings for the food industry?

Yes, we stock O-rings in EPDM 70 peroxide and silicone MVQ 70 marked FDA, some items also BfR. You will find them by the FDA marking in the product name or with the material filter in the category. Silicone rings are available for example in red or transparent. Always assess compliance with regulations for a specific use according to the requirements of your operation.

How fast can you deliver O-rings?

We stock over 9,400 O-rings to DIN 3770 and ISO 3601 in metric and inch sizes. O-rings in stock are shipped immediately and delivery takes 1–2 days. Current availability is shown directly for each size, and you can filter the category by inside diameter, cross-section and material. If you cannot find the size you need, send us the designation and we will check whether we can supply it.

Product sorting

20 items total

List of products

109387 109387 o krouzek 10 x 2 nbr 3167 eu origin
€0,80 excl. VAT
€0,97

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON041228
562462 o krouzek 118 x 5 33 fep fpm ptfe din 3770
€42,33 excl. VAT
€51,22

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON040186
565267 o krouzek 118 x 5 3 nbr 70 din 3770
€2,23 excl. VAT
€2,70

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON040415
528880 o krouzek 118 x 5 3 fpm 80 din 3770
O-ring 118 x 5.3 FPM 80, DIN 3770
On order – within 3 weeks
€6,51 excl. VAT
€7,88

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON039546
109387 109387 o krouzek 10 x 2 nbr 3167 eu origin
€0,80 excl. VAT
€0,97

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON041227
121129 o krouzek 118 x 5 mvq 70 din 3770 eu origin
€2,83 excl. VAT
€3,43

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON002521
121126 o krouzek 118 x 4 5 nbr 70 din 3770 eu origin
€0,69 excl. VAT
€0,84

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON002520
121123 o krouzek 118 x 4 nbr 90 din 3770 eu origin
€1,28 excl. VAT
€1,55

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON002519
109387 109387 o krouzek 10 x 2 nbr 3167 eu origin
€0,55 excl. VAT
€0,67

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON041513
121120 o krouzek 118 x 4 fpm 80 din 3770 eu origin
€3,75 excl. VAT
€4,54

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON002516
563800 o krouzek 118 x 3 55 nbr 70 din 3770
€1,45 excl. VAT
€1,76

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON040263
232866 1 o krouzek 118 x 3 5 nbr 70 din 3770
O-ring 118 x 3.5 NBR 70, DIN 3770
On order – within 3 weeks
€0,70 excl. VAT
€0,85

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON038632
121111 o krouzek 118 x 3 nbr 70 iso 3601
O-ring 118 x 3 NBR 70, ISO 3601
On order – within 10 weeks
€0,28 excl. VAT
€0,34

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON002500
121114 o krouzek 118 x 3 nbr 70 din 3770 eu origin
€0,43 excl. VAT
€0,52

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON002499
565675 o krouzek 118 x 3 fpm 75 brown din 3770
€2,65 excl. VAT
€3,21

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON040551
121117 o krouzek 118 x 3 epdm 70 din 3770 eu origin
€0,69 excl. VAT
€0,83

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON002493
O-ring 118 x 2.5 FPM 80 DIN 3770
€2,79 excl. VAT
€3,37

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON040694
109387 109387 o krouzek 10 x 2 nbr 3167 eu origin
€1,69 excl. VAT
€2,05

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON041512
121108 o krouzek 118 x 2 epdm 70 din 3770 eu origin
€1,50 excl. VAT
€1,82

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON002483
121105 o krouzek 118 x 1 5 nbr 70 din 3770 eu origin
€24,86 excl. VAT
€30,08

An O-ring is a closed ring with a circular cross-section, made mainly of an...

SKL_ON002476

Listing controls

20 items total
Fast delivery
Fast delivery
Optimized Inventory
Guaranteed quality
Guaranteed quality
We cooperate with renowned manufacturers all over the world
Technical support available
Technical support available
We cooperate with manufacturers' engineers to solve technical problems