Bearings
Rolling bearings for machines, motors and agricultural machinery – the category contains more than 60,000 items. From our own stock we supply Dunlop and Medway bearings: deep groove ball bearings of series 60, 62, 63, 618, 619 and 160 with 2Z shields or 2RS seals and C3 clearance, self-aligning ball bearings, tapered roller bearings, thrust bearings and bearing units UCF, UCFL and UCP.
Further bearings of the brands SKF, FAG, INA, NSK, NTN, SNR, KOYO, NADELLA and DURBAL are supplied from partner warehouses. The bearing designation defines the type and size – e.g. 6204 2RS C3 is a deep groove ball bearing sealed on both sides with increased clearance. Bearings from our stock are delivered within 1–2 days, bearings from partner warehouses within 1–3 or 2–4 days depending on the supplier.
Frequently asked questions
How do I read a bearing designation?
The basic designation defines the bearing type and size. For example, in 6204 the 62 means a deep groove ball bearing of series 62 and 04 an inside diameter of 20 mm, because from 04 upwards the number is multiplied by five. The suffix 2RS means rubber seals on both sides, 2Z metal shields on both sides and C3 increased radial clearance. The full designation is stamped on the outer or inner ring of the bearing.
What is the difference between 2Z and 2RS bearings?
A 2Z bearing has metal shields on both sides that do not touch the inner ring, so it has low friction. A 2RS bearing has rubber seals on both sides that protect better against water and fine dust. Both versions are greased for life at the factory. Choose 2RS for dusty or wet environments and 2Z for higher speeds in a clean environment.
What does C3 clearance mean and when should I choose it?
C3 denotes a radial clearance larger than normal clearance. It is chosen where the bearing heats up more in operation or where it has a tight fit on both the shaft and in the housing, for example in electric motors. If the original bearing had C3 clearance, order a C3 bearing again. We stock ball bearings with C3 clearance.
What can replace a bearing of another brand?
The basic designation of a bearing, for example 6204, is the same for all major manufacturers. Only the suffixes for seals and clearance differ, for example SKF uses 2RSH and NSK DDU for seals on both sides. A bearing with the same basic designation, the same seal type and the same clearance is therefore a replacement regardless of brand. If you cannot find the size you need, send us the designation and we will check whether we can supply it.
How fast can you deliver bearings?
Dunlop and Medway bearings from our stock are delivered within 1–2 days. Bearings of the brands SKF, FAG, INA, NSK, NTN, SNR, KOYO, NADELLA and DURBAL are supplied from partner warehouses within 1–3 or 2–4 days depending on the supplier. The category contains more than 60,000 items and each bearing shows its current availability and delivery time.