Radial shaft seals, fabric-reinforced and cassette seals

RADIAL SHAFT SEAL

Radial shaft seals, also known as oil seals, separate two liquid or gaseous media around rotating shafts with a low pressure differential.
A radial shaft seal consists of a rubber (elastomer) part, a metal insert and a garter spring that provides the correct radial load on the sealing lip. The elastic outer diameter compensates for thermal expansion and the surface roughness of the housing bore. In some designs the spring or the metal insert may be omitted. Special versions can have a stainless steel spring, a metal outer case, a metal sleeve or a hydrodynamic lip pattern. They can be double-lipped or springless.

FABRIC-REINFORCED SEAL (SEVANIT)

Sevanit is a rotary shaft seal used to seal around rotating shafts of larger and large diameters (rolling mills, mills, marine gearboxes, wind turbines, etc.). For shafts up to 380 mm in diameter, standard radial shaft seals according to CSN 9401 are recommended. Unlike radial shaft seals, sevanit seals have no metal insert but only a fabric-rubber reinforcing ring. Thanks to this flexible reinforcement, a sevanit seal is easy to handle even when installing it in large-diameter housings. Like a radial shaft seal, it is fitted with a garter spring.

CASSETTE SEAL

Cassette seals are special shaft seals for very demanding conditions. Their complex design provides optimal protection against water, dust, mud and other coarse contaminants. They are characterized by high resistance and long service life. This generation was developed in response to constantly growing requirements for longer service life, functional reliability, environmental protection and easy installation. They are used to seal axles and wheel hubs of heavily loaded vehicles and industrial gearboxes.

Product sorting

22 items total

List of products

Radial shaft seal 41.27 x 50.8 x 6.35 WAS (TC NBR), DIN3760
€3,17 excl. VAT
€3,84

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC is a...

SKL_G249370
Radial shaft seal 38.1 x 50.8 x 6.5 WC (SA NBR), NAK
€3,63 excl. VAT
€4,39

The rotary shaft seal (oil seal) is used to separate two media. Type WC - SA is a...

SKL_G264130
Radial shaft seal 38.1 x 50.8 x 6.35 WAS BLUE, TECHNOX
€2,28 excl. VAT
€2,76

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC NBR...

SKL_G096110
566092 gufero 38 x 54 x 10 was tc nbr din 3760
€2,28 excl. VAT
€2,76

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC is a...

SKL_G268420
Radial shaft seal 38.1 x 50.8 x 11.1 WAS BLUE, TECHNOX
€3,17 excl. VAT
€3,84

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC NBR...

SKL_G096120
Radial shaft seal 36.5 x 50.8 x 7 WAS BLUE, TECHNOX
€2,93 excl. VAT
€3,55

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC NBR...

SKL_G090840
Radial shaft seal 34.92 x 50.8 x 9.52 WAS (TC NBR)
€2,28 excl. VAT
€2,76

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC is a...

SKL_G259440
Radial shaft seal 31.75 x 50.8 x 9.52 WAS BLUE, TECHNOX
€2,62 excl. VAT
€3,17

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC NBR...

SKL_G073360
162163 gufero 12 x 32 x 10 was nak
€2,98 excl. VAT
€3,60

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC, TG,...

SKL_G267090
Radial shaft seal 31.75 x 50.8 x 12.7 WAS (TC), NAK
€2,27 excl. VAT
€2,75

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC, TG,...

SKL_G073400
Radial shaft seal 31.75 x 50.8 x 11.1 WBS BLUE, TECHNOX
€2,76 excl. VAT
€3,34

The rotary shaft seal (oil seal) is used to separate two media. Type WBS - TB NBR...

SKL_G073370
Radial shaft seal 30 x 50.8 x 7 WAS BLUE, TECHNOX
€2,28 excl. VAT
€2,76

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC NBR...

SKL_G069530
Radial shaft seal 30 x 50.8 x 7 WAS (TC), NAK
€2,40 excl. VAT
€2,91

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC, TG,...

SKL_G069520
Radial shaft seal 29.36 x 50.8 x 6.35 WAS BLUE, TECHNOX
€2,54 excl. VAT
€3,07

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC NBR...

SKL_G065020
Radial shaft seal 28.58 x 50.8 x 9.5 WBS (TB), NAK
€3,54 excl. VAT
€4,28

The rotary shaft seal (oil seal) is used to separate two media. Type WBS - TB, TM,...

SKL_G063970
Radial shaft seal 28.58 x 50.8 x 9.5 WA
€2,98 excl. VAT
€3,60

The rotary shaft seal (oil seal) is used to separate two media. Type WA - SC is a...

SKL_G063960
Radial shaft seal 28.58 x 50.8 x 6.35 WAS BLUE, TECHNOX
€2,28 excl. VAT
€2,76

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC NBR...

SKL_G063940
Radial shaft seal 25.4 x 50.8 x 6.35 WAS BLUE, TECHNOX
€2,79 excl. VAT
€3,38

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC NBR...

SKL_G056130
Radial shaft seal 25.4 x 50.8 x 12.7 WAS BLUE, TECHNOX
€2,28 excl. VAT
€2,76

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC NBR...

SKL_G056150
Radial shaft seal 25.4 x 50.8 x 12.7 WAS (TC NBR), NAK
€2,50 excl. VAT
€3,03

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC, TG,...

SKL_G261320
Radial shaft seal 22.23 x 50.8 x 6.35 WAS BLUE, TECHNOX
€2,28 excl. VAT
€2,76

The rotary shaft seal (oil seal) is used to separate two media. Type WAS - TC NBR...

SKL_G045490
Pressure shaft seal 38.1 x 50.8 x 5.5 WAY (SCN NBR), NAK
€7,07 excl. VAT
€8,55

Pressure shaft seal for rotary sealing of low-pressure applications (up to 10...

SKL_G260110

Listing controls

22 items total
Fast delivery
Fast delivery
Optimized Inventory
Guaranteed quality
Guaranteed quality
We cooperate with renowned manufacturers all over the world
Technical support available
Technical support available
We cooperate with manufacturers' engineers to solve technical problems