Flat gaskets

Flat sealing washers (gaskets) for fittings, drain plugs, hydraulics and fuel systems – more than 460 stock items. Copper washers to DIN 7603 A, aluminium washers to Czech standard CSN 029310.3 and rubber flat gaskets in NBR, EPDM and SBR in thicknesses from 1 to 8 mm, plus felt rings.

The size is given as outside diameter x inside diameter x thickness – e.g. copper washer 22 x 16 x 1.5 mm or aluminium washer 17 x 13 x 1.5 mm. Copper and aluminium washers are intended for a single tightening, use new ones for every installation. Products made to DIN and CSN standards, some items by GeTech. Gaskets in stock are shipped immediately, delivery within 1–2 days.

Frequently asked questions

When should I use a copper washer and when an aluminium one?

Copper washers to DIN 7603 A and aluminium washers to Czech standard CSN 029310.3 are both used under fittings and drain plugs and in hydraulics and fuel systems. When tightened, a metal washer deforms permanently and fills the unevenness of the mating surfaces. For a replacement it is simplest to choose the same material and size as in the original assembly.

Can I reuse a copper or aluminium washer?

We do not recommend it. Copper and aluminium washers are intended for a single tightening, during which they are compressed and adapt to the mating surfaces. Once loosened they no longer seal reliably, so use a new washer for every installation, for example when changing oil at the drain plug. It is an inexpensive part and prevents fluid leaks.

How is the size of a flat gasket written?

The size is given as outside diameter x inside diameter x thickness, for example copper washer 22 x 16 x 1.5 mm or aluminium washer 17 x 13 x 1.5 mm. If a rubber gasket shows an inside diameter of 0 mm, it is a solid disc without a hole. If you cannot find the size you need, send us the designation and we will check whether we can supply it.

Which rubber gasket material should I choose?

We have rubber flat gaskets in NBR, EPDM and SBR in thicknesses of approximately 1 to 8 mm. NBR is suitable for oils and fuels, EPDM is not suitable for mineral oils and is used rather for water and outdoor conditions. For individual sizes we also offer GeTech fibre washers, PTFE, MVQ silicone and felt rings to Czech standard CSN 023655.

How many flat gaskets do you have in stock and how fast can you deliver them?

We have more than 470 flat gasket items in stock, most of them copper and aluminium washers in metric sizes. Gaskets in stock are shipped immediately and delivery takes 1–2 days, the current quantity is shown on each product card. Sorting the category by best sellers helps you quickly find the most frequently used sizes.

Product sorting

2 items total

List of products

Flat gasket - annular ring, material NBR, outer diameter 65mm, inner diameter 54mm, thickness 2mm
€0,65 excl. VAT
€0,79

Flat gasket ring made of NBR rubber. NBR is suitable for industrial applications –...

SKL_GAS012740
Flat gasket - annular ring, material NBR, outer diameter 65mm, inner diameter 54mm, thickness 1mm
€0,58 excl. VAT
€0,70

Flat gasket ring made of NBR rubber. NBR is suitable for industrial applications –...

SKL_GAS012730

Listing controls

2 items total
Fast delivery
Fast delivery
Optimized Inventory
Guaranteed quality
Guaranteed quality
We cooperate with renowned manufacturers all over the world
Technical support available
Technical support available
We cooperate with manufacturers' engineers to solve technical problems